Capteurs · exemple
Lire un capteur météo 433 MHz abordable
Température, humidité, pluie ou vent dans votre tableau de bord.
Enable only the required receive protocol, such as Oregon, FineOffset, Rubicson, Hideki or LaCrosse. Temporarily enable Auto Discovery so Home Assistant creates the sensor.
Étapes
- Check on the compatibility page which protocol belongs to your device.
- Enable only the required receive protocol on the RFX web page or in RFXmngr.
- Temporarily enable Auto Discovery when using MQTT.
- Activate the remote control or sensor, or add the device manually with the correct MQTT topic.
- Test the controls in Home Assistant and then disable Auto Discovery again.
Conseil
Use a fixed IP configuration, a unique Hostname/MQTT Client name and a good 5V/2A power supply for the most stable operation.
← Retour aux exemples