Durchsuchen Sie die RFXCOM-Historie: Firmware-Releases, RFXmngr-Updates, neue Protokolle und Produktneuigkeiten.
Firmware version 433_1026 Receive decoding changed and multiple protocols can be enabled with less reduction in sensitivity Livolo appliance changed to Livolo 1 to 10 with more commands supported (needs an application change) Oregon SL109 added RAW receive and transmit added During startup the recei…
Mehr lesen →Firmware changes in version 433_1025 Byron SX improved Visonic WTN201 detection added BTHGN129 temperature corrected for 0 and -0.1 degrees Celsius Kerui motion sensor correct reported as X10 motion sensor Livolo update for Scene cmd Mertik G6R-H4TB updated
Mehr lesen →Firmware changes in version 433_1024 Viking 02038 version 03/2017 improved Telldus temp/hum sensors 313159 and 313160 are supported
Mehr lesen →Firmware changes in version 433_1023 A-OK AC127 added Cartelectronic improved LightwaveRF updated Livolo updated
Mehr lesen →Firmware changes in version 433_1022 - Kerui gas and CO2 detectors supported - 1byOne improved - Energenie transmitted packets increased - Imagintronic/Opus improved - A-OK corrected
Mehr lesen →Firmware changes in version 433_1021 - new WS1200 detected - Blyss receive improved - BLYSS Temp/Hum sensor 630467 added in Ext - BlindsT1 improved (Type1/2) - BlindsT2 and BlindsT3 improved - Cartelectronic Linky added
Mehr lesen →Firmware changes in version 433_1020 - Temp/Hum sensor AOK2011/2026 added as Rubicson - Chuango keyfob added in Ext2 - BlindsT3 A-OK AC114 unit code forced to 1 - New Banggood DANUI ensor supported in Ext firmware
Mehr lesen →Firmware changes in version 433_1017 - RM174RF always battery full indicated - Chuango updated - BLYSS Temp/Hum sensor 630467 added in Type1 & Type2 - BTHGN129 updated - Energenie improved - Imagintronix improved
Mehr lesen →Firmware changes in Ext2 version 433_1016 - TH9 - F007TH temperature+humidity sensor added (Ext2) - TH9 - TFA 30.3208.02 added (Ext2) - cartelectronics removed from Ext2 - BBSB removed from Ext2 - Kerui improved (Ext2)
Mehr lesen →Firmware changes in versions 433_1014 – Alexto WSD10 added in Ext2 Firmware changes in versions 433_1015 – Kerui improved with Rubicson enabled
Mehr lesen →Firmware changes in versions 433_1013 – Kangtai is Cotech, SilverLine,... added (Ext2) – Kerui improved RFXmngr program version 18.0.0.17 – Lighting5 - Kangtai added – Screenline commands updated – ASA id displayed
Mehr lesen →Firmware changes in versions 433_1012 – Screenline added (Ext2) – Kerui improved (Ext2 + X10 enabled) – Mertik G6R-H4T1 improved – MCZ check on valid command added RFXmngr program version 18.0.0.14 – BlindsT13 - Screenline added – MCZ ID displayed – MCZ No Air added RFXmngr program version 18.0.0.15…
Mehr lesen →Firmware changes in versions 433_1011 – MCZ pellet stove 3 fan model added RFXmngr program version 18.0.0.13 – MCZ 3 fans selection added
Mehr lesen →Firmware changes in versions 433_1010 – Marquant 934134 added in Type2 – ARC undecoded updated RFXmngr program version 18.0.0.11 – BlindsT3 unit number decoded – MCZ 1 or 2 fans selection added – Lighting4 added for RFXtrx315 RFXmngr program version 18.0.0.12 – special MCZ receiver (434.50MHz) added
Mehr lesen →Firmware changes in versions 433_1009 – RFY corrected RFXmngr program version 18.0.0.10 – MCZ fan2 selection 0 added for 1 fan models
Mehr lesen →